Related Topics:

Formulas Tab and Insert Function

DOE++ Analysis Reports

In DOE++ only, you can use the DOE++ Analysis Reports feature to insert selected analysis results and plots into a Synthesis Workbook.

This feature is available for any analyzed response in a design, multiple linear regression, one-way ANOVA or measurement systems analysis folio. The report can display any result that's available in the folio's Analysis Summary window for the selected response, as well as any applicable plot.

This topic describes how to build and insert a DOE++ analysis report, and how to use saved profiles for reports that you need to generate frequently. Note that you can insert multiple reports into the same spreadsheet or word processing document, if desired. Each additional report will be appended to the end.

Inserting a DOE++ Analysis Report

  1. Select either the spreadsheet or word processing module in a Synthesis Workbook and choose Home > Report > DOE++ Analysis Report.

 

  1. In the Select Response window, choose an analyzed response to copy the results from and click OK.

  1. In the DOE++ Analysis Report window, the Available Report Items area (left) shows all of the available results and plots for the selected response. The Selected Report Items area (middle) shows the selected results/plots, in the order in which they will appear. You can:

    1. Choose Profiles > Open Profile to apply all of the relevant selections from a saved report profile. (See Using DOE++ Report Profiles.)

    2. Build/modify the list using double-click, drag and drop or the Add/Remove and Up/Down buttons.

Note that you can include multiple instances of the same report item, if desired.

  1. When you click each selected report item, the Item Properties area (right) allows you to view/change the name (heading) that will be used in the report, if desired.

For plots, you can also click the Preview Plot button to see what the plot will look like in the report. Any plot settings you change in the plot preview will be used in the generated report but will not affect the folio the report is based on.

  1. Choose Actions > Generate Report.

Using DOE++ Report Profiles

When the DOE++ Analysis Report window is open, you can save the current settings (i.e., report item selections), or load settings that were previously saved.

Then specify the name and location of the DOE++ report file (*.drt) that will store the settings.

Then select the *.drt file that has all the desired settings.

Note: When you load report items from a DOE++ report file, only the items that apply to the selected folio/response will be included in the report.

 

© 1992-2016. ReliaSoft Corporation. ALL RIGHTS RESERVED.

E-mail Link