Standard Report Forms

The following predefined forms can be included in the reports you generate from the Xfmea/RCM++/RBI Reports window.

General
- Report Summary presents a list of the report forms that are included in the main report.
- Rating Criteria and Classifications presents the calculation method, rating criteria and classification options used in the analysis.
- Analysis Plans Summary presents full information for each analysis plan.
- Analysis Plan Details (One per Item) presents the details for each analysis plan associated with each of the selected items.
Items
- Items Summary (All Items) presents the system hierarchy plus a full summary of the properties for each item. If the system hierarchy contains more than one system, then the items under the first system will be displayed followed by the items for the second system, and so forth.
- Items Integrated Documents is available only for reports generated in Microsoft Word. It includes any integrated documents attached to each item (via the Attachments window).
Risk Based Inspection (available only for RBI)
- Equipment/Component Types (All Project Items) displays the RBI equipment types or RBI component types in the system and how many there are of each type.
- Risk Matrix Reports are a group of eight reports that display either the area risk scoring matrix or the financial risk scoring matrix as of the plan date. The following types of reports are available:
- - To see the total number of items in the project that fall into each cell of the matrix, generate the "All Project Items" report. If you want to see the names of only the selected items, generate the "Selected Items" report.
  - The basic report shows the results as of the plan date, assuming that you do nothing until then. To generate a matrix with the results as of the plan date assuming that the recommended inspections on the target date are carried out, generate the "Results Assuming Inspections Performed" report.
- Consequence Summary displays information about the possible damage consequences for each non-HEXTUBE and non PRD component.
- Damage Summary at RBI Date/Plan Date displays the calculated damage summary values at the applicable date for each non-HEXTUBE and non PRD component.
- Recommended Inspections at Due Date lists the number of suggested inspections and the needed effectiveness ratings for each damage factor for each non-HEXTUBE and non PRD component.
- Probability at RBI Date lists the probability of failure and financial consequences at the RBI date for each non-HEXTUBE and non PRD component.
- Risk Summary at RBI Date/Plan Date lists the financial risk details at the applicable date for each non-HEXTUBE and non PRD component.
- HexTubes Summary displays information about each HEXTUBE component.
- PRDs Summary displays information about each pressure relief device.
- Thinning Damage Factor displays information about the thinning damage factor properties for each selected component.
Risk Discovery
- Risk Discovery Logic presents the risk discovery questions and ratings used in the analysis.
- Risk Discovery Summary (with Questions) presents the answers given to questions in the risk discovery analysis, if any.
- Risk Discovery Summary (with Ratings) presents the risk discovery ratings specified in the risk discovery analysis, if any.
- Risk Discovery Details (One per Item) presents a separate report for each selected item showing the answers given to the risk discovery questions and the risk discovery ratings specified in the risk discovery analysis.
P-Diagram
- P-Diagram (One per Item) presents a separate report for each Parameter Diagram (P-Diagram) that has been defined for the selected items.
PFD Spreadsheet
- PFD Standard presents the process flow diagrams (PFD) data, if any, in the traditional tabular format. Reports will be generated only for selected items that have an associated PFD analysis.
PFD Records. There are no standard report forms for PFD records. This category may contain any relevant custom report templates and/or any custom queries that you have created.
FMEA Spreadsheet presents the FMEA data in the traditional tabular format. The number of separate forms generated will depend on the items selected in the Select Items area. (See Sub-Item Data Combined or Separated.)
- FMEA Standard creates an FMEA spreadsheet that includes information from the most basic elements of most FMEAs. This is a very basic style and should only be used when you are not required to meet published guidelines for the current profile.
- AIAG Form A through AIAG Form E create FMEA spreadsheets that are consistent with the examples published in the Automotive Industry Action Group (AIAG) guidelines.
- J1739 (2002) and J1739 (2009) create FMEA spreadsheets that are consistent with the examples published in the 2002 and 2009 revisions of the Society of Automotive Engineers (SAE) guidelines.
- MIL-STD-1629A creates an FMEA spreadsheet that is consistent with the example published in the military standard.
- VDA-86 and VDA-96 create FMEA spreadsheets that are consistent with the examples published in the VDA Volume 4 guidelines used by the German automotive industry.

Tip: In addition to the predefined spreadsheets, you can also export the FMEA data by choosing System Hierarchy > Tools > Reporting > Send Active View to Excel or Export to Excel.

FMEA Records
- VDA Action Tracking presents an actions summary report configured to match the "Action Tracking" template in the VDA Volume 4 guidelines used by the German automotive industry.
- Action Details (One per Action) presents a separate report for each action that has been defined for the selected items. If this report form is selected for inclusion in the generated report, the Select Actions for Detail Report window will appear when you click Generate Report.
- Functions, Failures, Effects, Causes, Controls and Actions are available only if the default Standard templates file is selected in the Templates Manager. They are report templates that were created by ReliaSoft and saved in the default Standard templates file, XRUT.xrt11, which is located by default in your My Documents folder (e.g., C:\Users\<your USERNAME>\My Documents\ReliaSoft\Common).

Criticality presents the results from quantitative or qualitative criticality analysis performed in the FMRA.
- Criticality Analysis (Standard) presents the quantitative criticality analysis in a tabular format that is based on MIL-STD-1629A but includes some modifications to the header information and uses customized column headings.
- Criticality Analysis (MIL-STD Quantitative) and Criticality Matrix (MIL-STD Quantitative) present the quantitative criticality analysis in a format that is based on MIL-STD-1629A. For the matrix, Severity Classification is on the horizontal axis and Mode Criticality is on the vertical axis.
- Criticality Analysis (MIL-STD Qualitative) and Criticality Matrix (MIL-STD Qualitative) present the qualitative criticality analysis in a format that is based on MIL-STD-1629A. For the matrix, Severity Classification is on the horizontal axis and Failure Probability is on the vertical axis.
- Criticality Ranks presents the items and failure modes, ranked by item criticality and then by mode criticality.

RCM (available only for RCM++ and RBI)
- Functional Failure Analysis presents the functions, functional failures, effects and causes (failure modes) that have been identified for all selected items.
- Failure Effect Categorization (One per Effect) presents a separate report for each failure effect showing the FEC logic diagram decisions, along with any notes/remarks.
- Maintenance Task Selection (One per Cause) presents a separate report for each maintenance task that has been defined for the selected items.
- Tasks is available only if the default Standard templates file is selected in the Templates Manager. It is a report template that was created by ReliaSoft and saved in the default Standard templates file, XRUT.xrt11, which is located by default in your My Documents folder (e.g., C:\Users\<your USERNAME>\My Documents\ReliaSoft\Common). It lists the tasks and related details that have been defined for the selected items.

Note: This report includes properties from the higher-level records (i.e., the cause and item) that the task is associated with. This means that the same task may be repeated in the report if it is used multiple times. To generate a report that lists unique tasks only, you can create a query using the "FMEA Cause Tasks" group that only includes properties that belong to the task records. You can then use that query as a report.

Control Plan Spreadsheet
- Control Plan Standard presents control plan data, if any, in the traditional tabular format. Reports will be generated only for selected items that have an associated control plan analysis.
Control Plan Records. There are no standard report forms for control plan records. This category may contain any relevant custom report templates and/or any custom queries that you have created.
DVP&R Spreadsheet
- DVP&R Standard presents design verification plan data, if any, in the traditional tabular format. Reports will be generated only for selected items that have an associated DVP&R analysis.
DVP&R Records. There are no standard report forms for DVP&R records. This category may contain any relevant custom report templates and/or any custom queries that you have created.
DRBFM Spreadsheet
- DRBFM Standard presents design review based on failure mode analysis data, if any, in the traditional tabular format. Reports will be generated only for selected items that have an associated DRBFM analysis.
DRBFM Records. There are no standard report forms for DRBFM records. This category may contain any relevant custom report templates and/or any custom queries that you have created.

E-mail Link