Related Topics: | ||
The gage agreement folio control panel allows you to control the settings for analyzing the measurement system data. It also displays the results of the analysis. The panel is composed of the following pages:
The Main Page contains most of the tools you will need to analyze the measurement data.
The Analysis Settings Page contains additional settings for the measurement systems analysis.
The Comments Page allows you to enter notes or other text that will be saved with the folio.
The Main page of the control panel includes the following tools and areas.
The folio tools are arranged on the left side of the control panel. Use these tools to configure your analysis and experiment with the analysis results.
Calculate analyzes the measurement data and displays a summary of the results on the control panel.
Plot creates a plot based on the analysis. If you click this icon before the current data set has been analyzed, an analysis will be performed automatically.
View Analysis Summary opens a window that contains detailed information about current and past analysis results.
Tip: There is a horizontal splitter bar directly above the icons at the bottom of the panel. If you drag it as far up as it will go, all of the pages of the panel will be accessed by large buttons. If you drag it all the way down, all of the pages will be accessed by small icons. Positions in between allow you to use some large buttons and some small icons. (See Control Panels.)
The first table on the control panel is used to view the settings and status of the analysis.
In this example:
The specified risk level is 10%. This is also known as the alpha value, which is a measure of the risk that the analysis results are incorrect (i.e., alpha = 1 - confidence level). To configure the risk level used in the analysis, click the blue text, which will take you to the Settings page of the control panel.
"Analyzed" is shown in green, which indicates that the current response data has been analyzed using the current settings. Otherwise, this would show "Modified" in red.
The last row indicates that the analyzed data consists of 17 observations.
An analysis summary is shown when the current measurement data has been analyzed using the current settings. This area displays the following values.
The Accuracy rea displays the difference between the average observation of the first gage and that of the second gage. If the difference is significant according to the paired T-test that is performed on the data, then the accuracy of the gages is not the same.
The Precision area displays the variance due to repeatability for each gage. If the difference is significant, then the precision of the gages is not the same.
Click the Detailed Summary link in this area to view the details of the analysis results.
The Analysis page of the gage agreement folio is used to enter the Risk Level, or alpha value, which is a measure of the risk that the analysis results are incorrect (i.e., alpha = 1 - confidence level).
© 1992-2015. ReliaSoft Corporation. ALL RIGHTS RESERVED.