 |
 |
|
 |
 |
|
 |
 |
 |
The Analysis tab is visible when you are working with an analytical diagram or a Markov diagram.
Analyze
analyzes the relationships of the components in the diagram and puts the
reliability-wise configuration into a mathematical formula.
Analytical
Plot creates a plot based on the analysis results. Clicking Analytical Plot before the diagram
has been analyzed will automatically perform the analysis and then plot
the data.
Analytical
QCP opens the analytical
Quick Calculation Pad (QCP). The QCP allows you to obtain reliability
results based on the algebraic solution for the currently active diagram.
Clicking the Analytical QCP icon
before the diagram has been analyzed will automatically perform the analysis
and then open the QCP.
Show Algebraic
Solution is available when you are working with an analytical diagram.
It generates the algebraic solution for the diagram (i.e., a mathematical
representation of the reliability-wise configuration of the diagram) and
opens the Equation Viewer.
Show Cut Sets
is available when you are working with an analytical diagram. It opens
the Cut Sets window, which allows you to determine
what are all the unique combinations of component failures that can cause
system failure.
Show Analysis Results
is available when you are working with a Markov diagram. It displays the
most recently generated simulation results in the Results
Explorer.
The
Publish commands allow you to
publish the diagram results as a model for use
throughout the project, in any ReliaSoft application where models are
used. Publish Analytical Model
publishes the analytical solution of the diagram, which is essentially
a direct reference to the diagram itself. Publish
Fitted Model creates a model based on the distribution that has
been fitted to the analyzed diagram, which is an approximation of the
entire diagram and its subdiagrams. For more on publishing, refer to the
Publishing Models topic.
Publish SEP Summary
publishes a summary of the current analysis to the SEP web portal. This
is visible only if the enterprise database is configured for SEP and you
have the “Publish to Synthesis Enterprise Portal” permission (see Publishing
to SEP).
© 1992-2019. HBM Prenscia Inc. ALL RIGHTS RESERVED.
 |
E-mail Link |